SKU#:
VS37W/2
Description:
Bluetooth Speaker
Editor:
Xue feng Sun
Approved by:
Henry Chen
Version:
1.0
Page:
3/3
3B02 & 3B03, No.5, Hsin-Yi Rd., Sec. 5, Taipei 11011, Taiwan, R. O. C. Tel: 886 2 27223333 Fax: 886 2 27225050
www.celltrend.com.tw
charging, you may leave your car kit powered off. This car kit is dual-charge enabled, please follow the simple
steps:
(1)Cigarette Lighter Plug: Connect the cigarette lighter plug to the car kit and plug the unit to the vehicle cigarette
lighter hole.
(2)Multi-Purpose USB Port: Connect the optional plug-in saver/charger (or travel charger) to the multi-purpose
USB port and plug the saver/charger (or travel charger) to the cigarette lighter hole (or wall outlet).
(b)Battery Power Indication: Charging indication is like this.
=>
=> =>
When charge is completed (up to 4.2V), the full charge indication
and
will flash on
constantly. After 3 seconds, you may see current status indication, for example:
.
Important:
(a) When car kit is powered off and charged, LCD will only flash on backlight,
and
.
(b) Charge time: Normal full charge time is 2 to 3 hrs. (Approx.).
(c) Charge indication: When charge is initiated, within 15 seconds(approx.), the LCD backlight will flash on for 3
seconds, then flash off. LCD will display
and battery charge indication will be like this
. Charge indication will be delayed for a few minutes if the car kit has not been used for a long time
or the battery is drained off.
(d) Low voltage indication: Whenever low battery power is encountered, the flat battery indication
will flash
on and car kit will emit two beeps every 30 seconds. It’s recommended to charge the car kit immediately to
prolong durability & standby time of battery. Under low voltage status, if the battery is not charged within
certain time (15 minutes approx.), the battery indication
will blink and the car kit will be powered off.
(e) Whenever encountering noise from speaker, please press and hold t
he
for 6
seconds.
Turning On/Off the Car kit
Turning On
: Car kit is under off mode:.
(a) Press and hold the MFB for 5 seconds(approx.) until the LED, LCD backlight,
and
flash on. Release
the MFB. Then, the backlight will flash off after 3 seconds with LED flashes every 15 seconds.
3.3V
3.7V
4.0V
4.2V
