common
+out
regulated DC supply
(20 volts max.)
–
+
(black)
(red)
(green)
red
green
black
celesco.com
v1.0
MT150 Installation Guide
Voltage Divider / 5k ohms
Mounting Dimensions
specification summary
Eyelet Option
Leader Cable Option
Mounting Hole Options
General
Stroke Range:
1.5 inches
Output Signal:
voltage divider (potentiometer)
Accuracy:
1% fs.
Measuring Cable:
0.014-in. dia. nylon-coated stainless
Measuring Cable Tension:
4 oz. ±25%
Enclosure:
anodized aluminum
Sensor:
conductive plastic precision potentiometer
Potentiometer Cycle Life:
≥ 5 million cylcles
Electrical
Resolution:
essentially infinite
Sensitivity:
897 - 924 mV/V
Input Resistance:
5K ohms, ±10%
Recommended Output Current:
<1 µA
Recommended Maximum Input Voltage:
20 Vdc
Environmental
Enclosure:
NEMA 12, IP50
Operating Temp:
-40° to -185°F (-40° to 85°C)
Temp. Coeff. of Sensing Element: .0028%/°F (.005%/°C)
M150 Specs:
celesco.com/_datasheets/m150.pdf
5K Ω
+in
common
+out
.74”
Eyelet Detail
18-inch, 30 gauge multiconductor cable
.740 [18,8]
.188 [4,78]
.095 [2,41]
.570 [14,48]
.570 [14,48]
Ø
.125 [3,18]
Ø
.250 [6,35]
.375 ± .02
[9,53 ± 0,05]
.740 [18,8]
15º ±15º
units are in inches [mm]
tolerances are ±0.010 inches [±0,25 mm] unless specified otherwise.
1.06 ± .03 in.
26,9 ± 0,75 mm
.981 ± .03 in.
24,9 ± 0,75 mm
.553 ± .03 in.
14,22 ± 0,75 mm
.062 [1,57]
mounting holes (2 plcs.)
#2-56 threaded or .093 inch dia.
thru option (see datasheet)
see detail
24-inch leader cable
1 - eyelet 5 - crimps
crimp*
*note: crimped stop prevents leader cable
from retracting into sensor body
included:
{
*–includes:
4) #2-56 x 3/8” pan head mounting screws with washers
.093 ±.010 in.
2,36 ±0,25 mm
dia. thru
#2-56 threaded
Thru Hole
Threaded Hole*
