Your unit needs to be registered to
operate. Refer to the Registration Guide
included in your product documents.
Troubleshooting
The key to better performance is the placement of the two units.
Please call your cell phone
provider.
(Error 7)
Unit disabled by network
Waiting for registration to complete. Run
Phone App or go to www.cel-fi.com/register
Try moving the units closer together.
The units are too far apart
Try moving the units farther apart.
The units are too close together
(Error 4)
NU
is overheating
Make sure that the vents (the small
openings in the plastic housing) on the
units are not blocked. Move the unit to
a cooler area. The system will start
working normally when it cools down.
Make sure that the vents (the small
openings in the plastic housing) on the
units are not blocked. Move the unit to
a cooler area. The system will start
working normally when it cools down.
(Error 3)
CU
is overheating
Reset the
Network Unit
by unplugging
it and then plugging it back in. If the
problem persists, return system for
service replacement.
(Error 6)
NU
Hardware Error
Try resetting the
Coverage Unit
by
unplugging it and then plugging it
back in. If problem persists, return
system for service.
(Error 2) CU
Hardware Error
Your unit needs to be registered to
operate. Refer to the Registration Guide
included in your product documents.
(Error 9) New registration required. Run
Phone App or go to www.cel-fi.com/register
Network Unit
is too close to a
cellular tower. Move your
Network
Unit
to another location. Try Moving
the
Network Unit
to the opposite
side of your Home/Office.
(Error 8)
Input signal too strong
(Error 1)
Not receiving signal
Relocate the
Network Unit
to
another room or area where you
have more coverage. (Use your cell
phone to find the best cellular
signal).
qsg-PRO-English_16-1107
NEED HELP?
For further instructions, visit:
www.cel-fi.com/support
Box Contents:
•
Quick Start Guide
•
Network Unit
•
Coverage Unit
•
Power Adapters (2)
•
Mounting Brackets (2)
Cel-Fi
™
PRO
Quick Start Guide
