26
Ceiec Electric Technology
seconds returns to the Data Display mode.
3.2.1 Functions of buttons
The four front panel buttons take on different meanings in the Setup Configuration mode and are
described below:
<Energy>
:
Pressing this button for more than three seconds toggles between Data Display mode
and Setup Configuration mode. Once inside the Setup Configuration mode, pressing
this button selects a parameter for modification. After changing the parameter,
pressing this button again saves the new setting into memory.
<Power>
:
Before a parameter is selected for modification, pressing this button advances to the
next parameter in the menu. If a parameter is already selected, pressing this button
increments a numeric value or advances to the next value in the selection list.
<Harmonics>:
Before a parameter is selected for modification, pressing this button goes back to the
last parameter in the menu. If a parameter is already selected, pressing this button
decrements a numeric value or goes back to the last value in the selection list
.
<V/I>
:
Once a parameter is selected for modification, pressing this button moves the cursor
to the left by one position if the parameter being changed is a numeric value.
Otherwise, this button is ignored.
Making setup changes:
Press the
<Energy>
button for more than 3 seconds to access Setup Configuration mode.
Press the
<Power>
button to advance to the Password page.
A correct password must be entered before changes are allowed. The factory default
password is a numeric zero "0". Press the
<Energy>
button to select the parameter for
modification. Use the
<Power>
,
<Harmonics>
and
<V/I>
buttons to enter the correct
password.
Selecting a parameter to change:
Use the
<Power>
and
<Harmonics>
buttons to scroll to the desired parameter.
Press the
<Energy>
button to select the parameter. Once selected, the parameter value will
blink.
Changing and saving a parameter:
Use the
<Power>
,
<Harmonics>
and
<V/I>
buttons to make modification to the selected
parameter.
After modification, press the
<Energy>
button to save the new value into memory.
Returning to the Data Display mode:
Pressing the
<Energy>
button for more than three seconds to return to the default display
screen.
