HI-PE multi-zone --- Rev.
FI 050 GB 60K10 v2_1
18
III - SWITCHING ON AND DISPLAY MESSAGES
Before working with the device read the warnings and instructions in this section and in the paragraph
“
Installation, use and safety information
” carefully. Please note that CEIA is not responsible for any
damage that may result from installations that do not follow these guidelines.
Switching on the Metal Detector
After turning ON the equipment, an audible signal will sound and the display of the electronics unit will show
the following information:
CEIA
HIPE-PTZ
****
- - - -
Fig. III-1a
Manufacturer
Model
Alarm indication test
Normal operating
L1
power supply LED indicator
S1
On/Off
switch
Fig. III-1b Detail of the lower
connection module
Display messages
During operation the following messages may appear on the display (see also
AD
command, Programming
section).
Alarm indications
Messages with AD =0P-5P
(see Programming section).
Display
Buzzer
Meaning
- - - -
NORMAL FUNCTIONING
without metal masses in transit
*
**
***
****
small metal mass
O
O
O
medium metal mass
O
metal mass under the alarm threshold
*
**
***
****
Fig. III-2
AD
medium metal mass
O
O
O
large metal mass
O
metal mass over the alarm threshold:
duration of alarm indication determined
by the value of AD.
Messages with AD =0C-5C
(see Programming section).
Display
Buzzer
Meaning
SE31
Normal operation or metal mass under the alarm threshold
(sensitivity indication)
****
Fig. III-3
AD
Metal mass over the alarm threshold: duration of alarm indication determined by
the value of AD.
L1
S1
