HI-PE multi-zone --- Rev.
FI 050 GB 60K10 v2_1
15
MD1
XR
METAL
Barriers
It is recommended that the barriers be made of
insulating material (wood, glass, lexan, plastic
panelling, cordons, architectural embellishments
in insulating materials), so that any movement
due to knocks do not affect the antenna of the
metal detector.
For the same reason, avoid direct contact
between the barriers and the probe of the metal
detector.
MD1
XR
OHT
~2cm
CEIA Personal Effects Depository
We recommend placing a CEIA Personal
Effects Depository (
OHT
) between the metal
detector probe and the X-ray unit
This article acts both as a spacer between the
X-ray unit and the metal detector and as a
temporary depository for metal personal effects
which are not of dubious nature and therefore
not required to undergo X-ray analysis (coins,
keys and so on).
In this case, again, avoid direct contact between
the depository and the metal detector probe.
Fig. II-3b
