CEFLA NewTom 5G Series, Service Manual, Page: 14 / 23

NewTom 5G series – Patient Table Service Procedures 3-6
The following table shows the meaning of each limit switch
Limit switch L status H status Description
X
Stretcher Longitudinal
movement switches
○
Pantograph all the way out of the gantry
○
Pantograph all the way toward the gantry
Y
Stretcher Transversal
movement switches
○
Stretcher completely on the left
○
Stretcher completely on the right
Z
Pantograpg vertical
movement switches
○
Pantograph in the lowest position
○
Pantograph in the highest position
LT
Stretcher completely out
of the gantry switch
○
Stretcher all the way out of the gantry
UT
Unlock table switch
○
Stretcher lock
A
Anti-pitch safety switch
● AntiPinch activated
E
Emergency button switch
● Emergency button activated
3.1.3 DATA DEBUG page
In the DATA DEBUG page appear data about the system status.
DATA DEBUG page
REC= N°of received data packets with errors
TEC= N°of trasmitted data packets with errors
CAN CA0= CAN tree status: if “Ok” connection is good, if “NOk” connection failed
CAN CA1= CAN tree status: if “Ok” connection is good, if “NOk” connection failed
CAN CA2= CAN tree status: if “Ok” connection is good, if “NOk” connection failed
E0,E1,E2,E3= Contains the last four error codes
Press any button to return to the POS page.