Operating description
Machine overview
CEDIMA • Technical Documentation • CF • 4030 Joint Cutter • 194030001 – xx4030xx • Issue Date 17.03.2022
53
4.3.2.2
Switchbox – Engine
The Engine switchbox is located behind the rear cladding above the hydraulic oil container.
Glühkerze/
Glow plug
Switchbox – Engine
4.3.2.3
Fuses – Operating console
1
2
3
4
5
6
7
8
Fuses – Operating console
Legend
No.
Fuse circuit
Fusing
Colour
1
Suction unit
5 A
brown
2
Flushing water pump switch
5 A
brown
3
Flushing water pump
30 A
green
4
Belt tensioner
10 A
red
5
Power sockets
15 A
blue
6
Control system
7.5 A
brown
7
Control system
5 A
brown
8
Display
3 A
purple
4.4 Operating description
The CF•4030 joint cutter is a freely movable, walk-behind, hand guided machine with
a hydraulic drive. The CF•4030 Joint Cutter is used for wet cutting in asphalt and concrete,
as well as in similar abrasive construction materials. The CF•4030 joint cutter can be deployed
with different diamond saw blades on the left and right.
The diamond saw blades are directly driven by the motor via V-belts. The maximum
cutting depth is steplessly adjustable. The water supply is provided via pressurised water or
suctioned water.
