Parts of the machine
Machine overview
CEDIMA • Technical Documentation • CF • 4030 Joint Cutter • 194030001 – xx4030xx • Issue Date 17.03.2022
42
4.1.5.2
Front visor
The front visor is used by the operator to check and to set up the cut. The visor tips must be
mounted on the front side. The visor tips can be mounted on both sides of the front visor.
The front visor can be individually adjusted. The telescopic rod of the front visor is extended
for this purpose.
When the machine is in motion, the front visor is folded upwards and fastened in the visor
retaining strap holder on the operator’s console with the help of the visor retaining strap.
Front visor
Legend
No.
Designation
Description
1
Swivelling device
The front visor is folded up and down using the
swivelling device.
2
Clamping screws – telescopic
rod
Clamps the telescopic rod firmly in the swivelling
device.
3
Visor tip
Used by the user for check the set-up, execution
of the cut and a fixed distance to the edge of the
road. The visor tip can be used on the right and
left side of the swivelling device.
4
Clamping screws of visors
Clamps the visor firmly in the swivelling device.
5
Telescopic rod
The telescopic rod can be individually adjusted.
