115 097 | 180307 | V 1.0
TOF/Spot-car detection
Installation guide
Overview
Electrical connection
Introduction
The TOF/Spot-car detection has an operating range of 3 m. The sensor measures the distance to an object. As soon as
the object is detected within the threshold, the output is switched. The sensor is able to detect all types of car surfaces,
independent of their colour or reflectivity.
Installation
The installation has to be carried out according to the following steps:
1. Mark clearly that the modifying system is out of service and switch off main power.
2. Define ideal position (optical axis min. 150 mm to parallel surface).
3. Drill a hole at the required position or use a mounting bracket.
4. Snap the TOF/Spot-car detection into the hole or mounting bracket
5. Connect the sensor to the control unit.
6. Teach-in the desired range
The TOF/Spot-car detection has been specially developed to monitor the area directly beneath a car park barrier. This ensures
that if a car remains under a raised barrier, the barrier cannot be lowered to damage the car.
1
2
3
4
1
Optical window
2
Status LED
3
Connection cable
4
Teach-in button
30 mm ± 0.5
0.3 ... 3 mm
Connect the TOF/Spot-car detection as follows to the control unit of the car park barrier.
TOF/Spot
DC supply - Universal
Con
tr
oller
U
SP
(10 ... 30 VDC)
GND (0 V)
Test input*
Logic selector
Output A
Logic selector:
NO
= U
SP
NC
= GND or n.c.
n.c. = not connected and isolated
* = If test input not used - connect
with U
SP
or GND
Output A = Output B
Output B
black
brown
green
blue
white
gray
Important:
`
Output A and Output B are interchangeable
`
Any unconnected (n.c.) wires have to be
separated and isolated
* If test input not used - connect with U
SP
or
GND
