37
36
ENGLISH
ENGLISH
Suggested speed and capacity for each accessory
Accessory
Image
Function
Speed
Capacity
Operation
time
Stainless
steel blades
Fig. 11
Chop (+)
5
2L max, chop
1-2 cm
size before
operation
1 min.
Chop (++)
10
2L max, chop
1-2 cm
size before
operation
1 min.
MamboMix
spoon
Fig. 12
Knead dough
for bread,
pizza, etc.
2-3
800 g dough
max.
5-20 min.
Knead dough
for noodles
3
400 g dough
max.
3 min.
Butterfly
Fig. 13
Stir
1-3
2L max.
10 min.
Whisk egg
whites or
cream
4
2L max.
10 min.
Steamer
Fig. 14
Steam
vegetables
N/A
3.5L max.
15 min.
Steam meat
N/A
3.5L max.
20-30 min.
6. CLEANING AND MAINTENANCE
The stainless-steel jar is dishwasher safe.
Fig.15.
Warning: Assemble the part as shown below, only when the stainless-steel jar is washed in
the dishwasher.
The ceramic jar is not dishwasher safe. Clean it with lukewarm water and soap. Then rinse and
dry it thoroughly. Do not immerse or expose to water the connectors located on the bottom
part of the ceramic jar.
Fig.16.
When cleaning the ceramic jar, be careful not to soak it in water and avoid the bottom part,
where the heating element is, from getting wet.
Clean the food processor after each use.
Turn off and unplug the appliance from the power supply and allow it to cool down before
cleaning it.
Wash the butterfly whisk and the rest of the accessories with warm soapy water. Rinse and
dry thoroughly.
Wipe the main body with a clean damp cloth. If food residue remains, dampen the cloth in
warm soapy water before wiping it. Never immerse the main body in water or other liquid.
In order to maintain the good performance of your appliance, check and clean the removable
bottom part of the jar after each use. Wipe it with a soft damp cloth and dry it thoroughly
before using it again.
If the appliance is not going to be used for a long time, unplug it from the power supply and
store it in a cool and safe place.
The blades and the MamboMix spoon are dishwasher safe.
7. TROUBLESHOOTING
Error code
Description
Possible causes
Solution
E1
Safety switch
not fixed
The jar or the jar’s lid is
not fixed
properly.
Re-assemble the jar
and jar
lid, make sure all the
parts are
assembled properly
and tightly
and try operating it
again.
E2
Temperature
sensor error
The jar is not in its
correct
position or connection
of the
temperature sensor at
the jar
base is damaged.
Re-assemble the jar
and make
sure, it is fixed
properly.
