20
POWER ESPRESSO 20 TRADIZIONALE
ENGLISH
for steam to be emitted. (Img.4)
Warning: Do not rotate the steam knob quickly, otherwise steam will be accumulated and
will cause milk to be ejected, causing burns.
Note: The steam tube might emit some water droplets before producing steam.
Once the required milk froth is obtained, rotate the steam knob clockwise and set the
steam switch to the off position.
Warning: Wait for at least 2 minutes after operating the steam function before using it
again.
Pour the milk froth into the cup with previously brewed coffee, add sugar to taste and
sprinkle cocoa powder if you wish to have a cappuccino. You can also sprinkle cinnamon
or cardamom powder.
How water
Turn the device on by setting the On/off switch on. The red indicator light will start blinking
and the machine will start heating up.
Once it has finished heating, the red light will turn steady.
Slide the coffee switch downwards, the machine will start dispensing hot water. One you
have obtained enough hot water, take the switch to the off position.
Allow the machine to preheat and repeat these steps to dispense hot water as many times
as necessary.
Device cooling process
After steam is emitted or coffee is brewed, the device’s temperature is likely to increase
significantly, which means that all of its components will become very hot as the device
has been operating at high pressure. Both of the light indicators will start blinking quickly,
indicating the device’s temperature has to be decreased.
Rotate the steam knob anticlockwise and slide the coffee switch to the on position. Water
will be dispensed through the steam tube.
When the red-light indicator stops blinking, turn off the coffee switch and set the steam
knob to the off position. Temperature will start decreasing.
The machine will now be ready to brew more coffee.
5. CLEANING AND MAINTENANCE
Note: Proper and regular cleaning will ensure safe operation and extend the lifespan of
the device.
Turn off, disconnect the device from the power supply and allow it to cool down completely
before cleaning.
Do not use abrasive cleaners or scouring pads as they could cause damage to the product’s
