701225-25-XXXX
1
Type 4-126
Velocity Vibration Transducer
Made in the United States of America
Description
The 4-126 is a seismic type velocity transducer designed for measuring vertical vibrations at temperatures up to +700°F (+371°C). A
seismic mass magnet moves on precision bearings. A coil is attached to the case and relative movement between the magnet and
coil produce the output signal when the case is in motion. This air damped system operates above its natural frequency and the
output is proportional to velocity. The sealed enclosure assures complete protection of the moving parts from external
contamination.
Specifications
Sensitivity
4-126-0001:
4-126-0104:
4-126-0110:
@+75°F (+24°C), 100 Hz, 2 IPS (50.8 mm/sec) RMS into a 10,000 ohm resistive load
145 ±4 mV/ips
135 ±4 mV/ips
145 ±4 mV/ips
Frequency Range
4-126-0001:
4-126-0104:
4-126-0110:
45 – 1500 Hz
45 – 2000 Hz
45 – 2000 Hz
Frequency Response
±7% of the mean sensitivity
Amplitude Range
0.15 inch peak-to-peak, maximum
Acceleration Range
1 to 50 g peak
Linearity
±1% output at 20 g’s within dynamic range (vertical at 100 Hz)
Transverse Response
2% maximum
Temperature Range
-65°F to +700°F (-54°C to +371°C)
Thermal Coefficient of Sensitivity
0.02%/°F (0.01%°C) from +75°F (+25°C)
Damped Resonant Frequency
< 15 Hz nominal
Excitation
Self-generating
Insulation Resistance
0.1 meg-ohm minimum
Polarity
Pin 1 is positive when case is moved away from base
Weight
6 oz (170 g)
Accessories Included
Calibration Record
Optional Accessories
Cable and connector assembly (P/N 169500-XXXX)
Connector (P/N 173960)
See Pg. 2 for Sensor Installation Information
Cable Assemblies
CEC manufactures many types of specialized cable assemblies for use with the various velocity sensor applications that exist. The
mating connector CEC P/N 173960 is the common connector used across the entire CEC velocity sensor product line. Following is
a list of several typical cable assemblies used with this sensor type:
Cable Assembly P/N
Cable P/N
Connector “A” P/N
Connector “B” P/N
169500-XXXX 167811
173960 Prepped
Leads
173970-XXXX 174123 173960-0002
Prepped
Leads
82406-XXXX
168567
173960 “Special Low Temp”
Prepped Leads
Note: The –XXXX of the cable assembly P/N represents the length in inches. Example: 10 ft. = 120 inches or -0120.