Module AC output alarms
Text
ID
Name
Level
Def.
Map
Description
221
SBP temperature
sensor fail
Minor
Communication with temperature probe was lost
222
SBP overload
Minor
SBP Output power is higher than a threshold above nominal
power (105%) (not KO)
223
SBP overload too
long
Minor
SBP Output power is higher than a threshold (200%) above
nominal power for too much time (KO)
ANNEXE 5. FAQ
How can I reset my admin password if I have unfortunately forgotten it?
Before version 3.1, there is a generic password that always works: 123TEC. You can use it to connect and change your
expert password. As this has been identified as a potential risk for system integrity, we strongly recommend to update
to a newer version where security has been improved.
From version 3.1, in case of password loss, a new temporary password (valid 24 hrs after creation) can be issued by
CE+T Power. To receive a temporary password, send an email with your T4S serial Number and the date at which you
expect to go back on site to change the password to
specifically requesting a new
temporary password. The serial number can be found on the sticker on the T4S, or on screen in ‘Parameters’ then
‘Info’.
68
– Flexa 200 - 400/400 – User Manual – v1.0
Summary of Contents for FLEXA 200 400/400
Page 17: ...17 Flexa 200 400 400 User Manual v1 0 Hardware setup Page 2...
Page 69: ......
