•
The manufacturer declines all responsibilities if equipment is not installed, used or operated according to the
instructions herein by skilled technicians according to local safety regulations.
•
Warranty does not apply if the product is not installed, used and handled according to the instructions in the
manuals.
•
CE+T cannot be held responsible for disposal of the Inverter system and therefore the customer must segregate
and dispose the materials which are potentially harmful to the environment, in accordance with the local
regulations in force in the country of installation.
•
If the equipment is dismantled, to dispose of the products it consists of, you must stick to the local regulations in
force in the country of destination and in any case avoid causing any kind of pollution.
•
System is designed for installation in an IP20 environment. When installed in a dusty or humid environment,
appropriate measures (air filtering) must be taken.
3.1 Handling
•
The cabinet shall not be lifted using lifting eyes.
•
Remove weight from the cabinet by unplugging the inverters. Mark inverters clearly with shelf and position for
correct. This is especially important in three phase configurations.
•
Empty inverter positions must not be left open. Replace with module or cover.
3.2 Surge and transients
The mains (AC) supply of the modular inverter system shall be fitted with suitable Lightning surge suppression and
Transient voltage surge suppression for the application at hand. Manufacturer’s recommendations of installation shall
be adhered. It is advisory to select device with alarm relay for function failure.
Indoor sites are considered to have a working lightning surge suppression device in service.
•
Indoor sites:
Min Class II.
•
Outdoor sites:
Min Class I + Class II or combined Class I+II.
3.3 Other
•
Isolation test must not be performed without instructions from the manufacturer.
To download the latest documentation and software, please visit our website at
www.cet-power.com
Warranty and Safety Conditions
7
– e-one 10 - 48/230 - User manual - v1.2
