7. Finishing
•
Make sure that the inverter is properly fixed to the cabinet.
•
Make sure that the inverter is connected to Ground.
•
Make sure that all DC & AC input and AC output breakers are switched OFF.
•
Make sure that all breakers and cables are according to recommendations and local regulations.
•
Make sure that all cables are strain relieved.
•
Make sure that DC IN polarity is according to marking.
•
Make sure that AC IN phase and neutral connections are according to marking
•
Re tighten all electrical terminations.
•
Switch ON DC breaker.
Finishing
19
– e-one 10 - 48/230 - User manual - v1.2
