Fabricant de Contrôle d’Accès depuis 1985 Manufacturing Access Control since 1985
The installer’s choice
Receiver type:
Supereheterodyne.
Demodulation: AM/ASK.
Operating frequency:
433.92 Mhz.
Sensitivity ( for good signal ):
-115 dBm.
Input load:
50 Ohm.
Power supply :
230 Vac - 50 Hz.
Current consumption
10 mA @230 Vac
Relay contacts
NO/NC.
Max current on relay output:
16 A.
Memory capacity:
500 transmitters
Security protocol
Keeloq® Hopping code
N° of code combinations
2exp64
Operating temperature:
from -20 to +70 °C.
Overall dimensions ( Fig. 2):
123 x 81,5 x 41,5 mm
Weight:
65 gr.
Relay operating mode
Pulse, step, timed, on-off
Delay
from 1 sec. to 24h: 59 min.
Enclosure protection
IP55
The receiver Erone type SEL2641R433-XPL1V ( Fig. 1) is a AM/ASK single conversion
superheterodyne receiver with integrated “Keeloq® Hopping code” decryption.
A special algorithm allows to keep synchronyzed transmitter and receiver.
Power supply : 230 Vac.
The receiver relay output, can drive many type of loads, up to 16A / 230 Vac.
It’s advised to drive locks, magnets, and any type of power load.
The transmitter memorization can be carried out either with 2 push-buttons of the receiver
or remotely, using only the keys of the transmitter. The setup of the remaining parameters
can be done only with the 2 push buttons of the receiver. All the setting steps are displayed
by a backlit LCD display.
The internal data can be saved/restored to/from an external memory.
1 RELAY RECEIVER SEL2641R433-XPL1V
2
Technical Specifications
3
Mounting
www.erone.com - www.cdvigroup.com
Fig.1
1
Introduction
Option B ) Use of PG7 cable glands
( not provided )
Drill the placing surface
with ø6 mm tool and insert the
2 plugs
Then fix the support with
the screws provided
F1001000089
Fig. 3
Fig. 2
Fig. 1
ERONE
XPL1V
ERONE
XPL1V
ERONE
XPL1V
123
81,5
41,5