EN
EN
12
CDV-471IP
2EASY IP, 7” Screen Intercom Monitor
13] UPGRADE
1. From the main menu, tap the
Settings
icon.
- A list of available settings is displayed.
2. Select
Installer
, and then tap
Upgrade
.
3. Input the installer password (66666666 by default, or no password when the door
station has installer mode enabled)
IP address
192.168.251.016-s
Call_Nbr
(VS)Single Family
Parameter
Upgrade
Onsite tools
Installer
Call Tune
General
Installer
Manager
ExternalUnit
Server
Server1[47.91.88.33]
Download code
Check
Input IP Address
Server1[47.91.88.33]
Server2[47.106.104.38]
Server3[192.168.2.60]
SD Card
Upgrade
Upgrade
IP address
Call_Nbr
Parameter
Upgrage
Onsite tools
IP address
Call_Nbr
Parameter
Upgrage
Onsite tools
Input installer PWD
66666666
123
Touch
Server
to select the firmware source:
1. Cloud Server:
Cloud server requires internet.
Server1[47.91.88.33]
Server2[47.106.104.38]
2. Local LAN server (IX -Builder)
Use IX-Builder PC software to create a tempory local server for update.
Server3 [192.168.2.60]
#IX-Builder default IP
[Input IP address]
3. SD card
Copy upgrade firmware before upgrade.
After tapping
Download Code
and inputting the code, contact CDVI to get the code
when the device needs to be updated. Touch
Check
to load the upgrade information
from the source.
Screen messages:
• Please insert SD card
:
#The upgrade is too large, requires SD card to store firmware.
• Mismatched
: #Firmware update was found, but is not suitable for this device.
• Connect Error
: #Check networks.
•
No file
:
#Source has been inspected but there is no required firmware upgrade.