CDN DTTC Operating Instructions Download Page 1

Perfect For

• 

Roasts & other meats

• 

Oven and barbecue

• 

Candy making & deep fry

Easy To Use

• 

Instant readout of internal food temperature 

during cooking

• 

Alert sounds when set temperature is reached

• 

Sets upper or lower temperature limits

Features

• 

5.5"/14.0 cm probe

• 

3'/91.4 cm sensor cable

• 

Dual progress display

• 

Counts up & down

• 

Big digit

• 

Last count recall

• 

Clock

• 

International time

• 

ABS plastic case

• 

Stainless steel probe

• 

Sliding mode switch

• 

Temperature guide

• 

2-way mounting: magnet/stand

• 

Adjustable stainless steel clip

• 

Battery and instructions included

Get Professional Results 

Every Time!

Probe Thermometer

Perfect for roasting or grilling. Simply insert the 

probe into the food. Place the food in the oven or 

barbecue and close the oven door (or grill cover) 

directly over the sensor cable. Set the temperature 

alert for USDA safe cooking temperatures — listed 

on the back of the case! Both the set and actual 

temperatures are displayed during cooking.

For oven testing, the DTTC samples the variance of 

internal temperatures and displays the maximum 

and minimum temperatures reached. It’s also great 

for alerting properly chilled temperatures.

Timer

Count up or down with this big digit timer. Timing 

repetitive tasks is easy with the last count recall, 

and avoid confusion with the distinct sound on 

the timer alarm.

Clock

Choose from a 12-hour or 24-hour clock while 

the running seconds provide easy reference for 

short tasks.

Note:

 Remove sticker from display before use.

Note:

 In the following instructions, names of the control 

buttons are shown in CAPS. Function information that appears 

on the display is shown in 

BOLD CAPS

.

Battery Installation

Replace battery when LCD becomes dim and weak 

or alarm level declines.

1. Lift off the battery cover at the back of the unit.
2. Install 1.5V AAA battery observing polarity 

shown in compartment.

3. Replace the battery cover until it clicks shut.
4. 

LO 

will be displayed under 

THERMO 

when 

the probe/sensor cable is disconnected or 

malfunctions.

Model: DTTC

Combo Probe Thermometer, 

Timer & Clock

14 to 392°F/-10 to +200°C

Counts 24 hours by minutes & seconds

Summary of Contents for DTTC

Page 1: ...g For oven testing the DTTC samples the variance of internal temperatures and displays the maximum and minimum temperatures reached It s also great for alerting properly chilled temperatures Timer Count up or down with this big digit timer Timing repetitive tasks is easy with the last count recall and avoid confusion with the distinct sound on the timer alarm Clock Choose from a 12 hour or 24 hour...

Page 2: ...into the meat making sure that it is not inserted into a fatty deposit 2 Gently close the oven door on the sensor cable and insert the plug into the jack on the left side of the case 3 Press the ALERT button until the Upper Limit icon flashes under TEMP SET 4 Press the UP or DOWN button to set the desired temperature The alarm will sound when the probe temperature reaches the set temperature 30 se...

Page 3: ...d parts Do not tamper with the unit s internal component Doing so will invalidated the warranty on the unit and may cause unnecessary damaged battery and distorted parts Do not subject the units to excessive exposure to direct sunlight The unit is not waterproof Do not immerse it into water or expose to heavy rain Do not expose the sensor cable plug or the jack on the case to water or any liquid w...

Page 4: ...ument that proves to be defective in material or workmanship within five years of original purchase will be repaired or replaced without charge upon receipt of the unit prepaid at CDN PO Box 10947 Portland OR 97296 0947 This warranty does not cover damage in shipment or failure caused by tampering obvious carelessness or abuse USDA does not endorse any product service or organization OIL TEMPERATU...

Reviews: