background image

FOR YOUR PERMANENT FILE

19220 SAN JOSE AVENUE • CITY OF INDUSTRY, CA 91748 • USA 

(626) 965-0668 

Find other fine torque products at WWW.CDITORQUE.COM

WRENCH MODEL NUMBER:

WRENCH SERIAL NUMBER:

Form 20-1900-CDI

6/2010 Rev. N/C

US and Foreign Patents Pending - Made in USA with US and Global Components

For Warranty Claims, Contact CDI Torque Products 

at (626) 965-0668.

  

LIMITED WARRANTY 

The CDI Torque and Angle Electronic Torque 
Wrench is backed by a one year warranty. This 
warranty covers manufacturer defects and 
workmanship. The warranty excludes misuse, 
abuse and normal wear and tear. Exclusion is not 
allowed in some states and may not apply. This 
warranty gives you specific legal rights, and you 
may have other rights, which vary from state to 
state.

IMPORTANT ENVIRONMENTAL NOTES:

 

1. This equipment may contain hazardous materials which can be 
harmful to the environment. 
2. Do not dispose of this equipment as municipal waste. Return it  
to the distributor or a designated collection center.
Thank you for caring about our environment!

TORqUE ANd ANgLE

ELEcTRONIc 

TORqUE WRENcH

OPERATION MANUAL

Summary of Contents for 1002TAA







Reviews: