Tachograph programmer CD400 - User manual – V2.00 r07 (9/01/2014)
4.2 Measure K
This function is available only for the K1314/1318 and the FTCO 1319.
Measuring the K factor takes a few seconds.
The value is updated every time the progress bar is completed.
4.3. Parameters
The parameter list is available at:
4.4. Speed test
4.4.1 Manual
For the K1314/1318 the K reference is set to the last K measured if available,
otherwize it is set to 8000. For the other tachographs the K reference is set to the
K factor programmed in the tachograph.
If required, the K reference can be adjusted manually pressing 'F1' (MODIFY).
By default the speed is set to 60 km/h.
Press F1 (ON/OFF) to start/stop speed simulation.
The text "km/h" is blinking when the speed is currently simulated.
Pressing the '↑' and '↓' keys, will increase/decrease the speed by 1km/h steps.
Pressing the '←' and '→' keys, will increase/decrease the speed by 0.1km/h steps.
Press F1(MODIFY) to insert a new speed value.
M e a s u r e K
K :
0020
p / k m
K F a c t o r
K = 8 0 0 0 p / k m
M O D I F Y O K
060.0
k m / h
K : 8 0 0 0 p / k m
M O D I F Y O N
060.0
k m / h
K : 8 0 0 0 p / k m
M O D I F Y O F F
Page
17
sur
23
