Technicalinst. guide
Limpido XC2
v4.0
• AUTO: Chlorine production will automatically occur every day for a number of hours calculated
depending on the water temperature and the pool volume entered on the Pool vol." menu. (see
6.3.4) Remember, the calculated production time is (in hours): (Pool temperature - Minimum
temperature*) + 1. (see 3.3) If the cover is closed, this time is divided by 4.
• SHOCK: Chlorine production will occur on the first day for the number of hours programmed on
the "SHOCK hours" menu. Once this time has expired, the device automatically returns to AUTO
mode. This mode is used to remedy water that is starting to turn green or water that is no longer
clear. Closing the cover has no effect on this mode.
6.3.6. Short cuts
Some menu functions can be accessed directly from the screen saver (status) without scrolling
through the menus.
Press
To directly access
Key
Prod. mode AUTO
Production mode selection
6.4. Low temperature
The need for disinfectant drops significantly when the water temperature drops. In order to avoid
using the electrolysis cell needlessly, the device stops producing when the water temperature is
lower than the temperature programmed on the "Min. temp." menu and displays, on the system
status screen (screen saver);
This automatic wintering mode is only enabled in PROG and AUTO mode. This setting is not
taken into account in SHOCK or ON mode.
6.5. Automatic cover
If the Limpido XC2 is connected to an automatic cover, it detects when the cover is closed. If the
cover is closed,
• In PROG mode, production time is the time set on the "Cover cycle" menu.
• In AUTO mode, the calculated production time is divided by 4.
When the control box detects that the pool cover is closed it displays on the system status screen
(screen saver);
www.c-
cei.fr
20
