CC-ISOBUS CCI 50, Operating Instructions Manual

Page: 298 / 359

CCI.Command
– Operation
55
Exiting the map view
There are two ways to exit map view.
Note the following important distance:
When changing out of map view in the setting using the F7 function key automatic
Section Control is paused.!
When exiting map view via the home or toggle button, automatic Section Control
continues operating in the background.
4.4 Map view
Pressing the button "Map" (F1) takes you out of the Settings tab back to the map
view .
The map view is the CCI.Command working area. Automatic Section Control is
activated here.
Note
Dependent on the implement used, different buttons are available.