CC-ISOBUS CCI 50, Operating Instructions Manual

Page: 252 / 359

CCI.Command
– Set-up for operation
9
Pos : 5 /CC-I sobus/Auf bau @ 8\ mod_1273585112215_6. doc @ 120207 @ 12223333333332
Pos : 7 /CC-I sobus/I nst allation @ 8\ mod_1273570481145_6.doc @ 120033 @ 1223333
3 Set-up for operation
3.1 Connecting the Terminal
3.1.1 Connecting to a GPS receiver
Use of a GPS receiver is required for correct operation of the CCI.Command .
For information, please refer to the chapter Connecting with a GPS receiver in
the CCI.GPS operating instructions.
3.1.1.1 GPS data requirements
The following framework conditions must be adhered to for operation with
Command:
Baud 19200
GGA + RMC + VTG 5 Hz
GSA 1 Hz
GSV (optional) 1 Hz
3.1.2 Connecting with the external lightbar CCI L10
CCI.Command provides the option of using the external lightbar CCI L10.
Proceed as follows to connect the external lightbar to the terminal:
1. Connect the external lightbar CCI L10 to the terminal 's LIN interface .