S O M E I M P O R T A N T P R E C A U T I O N S
I N T E R N A L
E Q U I P M E N T
S P A C E
W A R N I N G
E L E C T R I C A L S A F E T Y
• Total weight of installed equipment must not exceed 120kg/264lb, symmetrically distributed.
• Use with products heavier than the maximum weights indicated may result in instability causing possible injury.
• Correct installation is essential to safe and reliable operation of the VCALL product and falls outside the scope of responsibility
of Colebrook Bosson Saunders. Please follow assembly instructions carefully.
• Do not use this product for any purpose other than that for which it was designed.
• Ensure that floor or wall surface is strong enough to support the weight of the fully-loaded VCALL and that the floor surface is flat and level.
• Do not install VCALL outdoors or in environments where it will be directly exposed to moisture or highwinds.
• Follow the manufacturer’s guidance for mounting of monitors, displays and other equipment.
• Please take care to avoid trapping fingers when installing or adjusting the product.
• Safe installation of electrical equipment is the responsibility of the installer.
• Colebrook Bosson Saunders recommends that only double-insulated electrical equipment and cables are installed in VCALL unit.
M A I N T E N A N C E A N D I N S P E C T I O N
• Ensure all screws and fixings are fully tightened and occasionally re-tighten if necessary.
• Clean with a dampcloth. DO NOT use solvents.
