RRS-4 Technical Manual 7/20/2011
4.1.2 Selected Breaker Data Preview
Once navigating through the breaker data and pressing "OK" (Figure 12.10), data (such
as seen in Figure 13) specific to that breaker model’s service operations will be
displayed. Again, these data screens are for preview only; to alter breaker data, the
operator must go to the Breaker Data Entry section (6.0).
1.
Disconnect to Test
– Value previously set by operator for racking the selected
breaker from disconnect to test position
2.
Test to Connected
– Value previously set by operator for racking the selected
breaker from test to connected position
3.
Connected to Test
– Value previously set by operator for racking the selected
breaker from Connected to Test position
4.
Test to Disconnected
– Value previously set by operator for racking the selected
breaker from Test to Disconnected
position
5.
Prev
– Navigate to the previous screen, Main Type 1
6.
Next
– Navigate to the selected breaker’s operation settings governing the
operation rotation
Figure 14: Screen preview of breaker operation settings
1.
2.
3.
4.
5.
6.
