8
CHAPTER 1. INTRODUCTION
Hardware Overview
Hardware Components -
This remote keyboard contains easy to use control keys on the
front and simple input and output connectors on the back
Control Buttons & Connection
-
The unit provides the primary operator interface. Most
operations are one or two button presses.
The following Table contains a description for each buttons
on the keyboard and port of cable connection. Use Figure 1
and Figure 2 as a reference.
F1 ~ MENU/AUTO : Function Keys
(Preset, Tour, Pattern, Scan, Auto).
MENU :Used for Camera (Pan/Tilt) Menu adjustment.
Function keys
5
Hold : System locking (Unlocking : Input the Pass word 4 digit ****)
SHIFT/TURBO : SHIFT-Key for special function (Customize) /
TURBO -High Speed
AUX : External equipment on/off
SET : Ptz and main setup (1 + ), (2+ )
IRES CLOSE : Camera Iris close
IRIS OPEN : Camera Iris open
Controller
Function keys
4
Camera ID setting value change, PTZ setup(1+ ),
Main setup(2+ )
Number
3
Displays Camera ID, Protocol, Function status, General status, etc.
LCD DISPLAY
2
Pressing the ESC/POWER button enters the Power on/off or escap
e key. Right description led on(red). Pressing it again exits the PO
WER OFF. (Push the button (about 2~3 seconds) and then
POWER OFF)
ESC / POWER
1
Description
Button
Number
1
2
3
4
5
6
7
< Figure 1 >
