background image

Made in Vietnam - r04

Page 1 of 4

gloss 

NIGHTSTAND

hardware

components

tools required

Thank you for purchasing the 

Gloss Nightstand

.

  

This 

page lists all the contents included in the box.  Please 
take the time to identify the hardware as well as the 
individual components to this product.  As you unpack 
and prepare for assembly, place the contents on a 
carpeted or padded area to protect them from damage.

Note: 2 people are recommended to safely install this 
product

.

Missing hardware?  
Please call 

800.606.6387

 for replacements.

(We recommend the use of hand tools instead of power tools)

Customer Service 

800.606.6252

  |  Latest instructions available at 

www.cb2.com

phillips head screwdriver

8 - screws

4 - cams

4 - bolts

8 - wood 
dowels

4 - flat 
washers

4 - cam 
screws

4 - spring 
washers

1 - bottom 
panel

1 - top 
panel

2 - side panels 

(1 left, 1 right)

2 - drawer sides 

(1 left, 1 right)

1 - drawer 
front

1 - back 
panel

1 - drawer 
back 

1 - drawer 
bottom

Summary of Contents for GLOSS

Page 1: ...ted or padded area to protect them from damage Note 2 people are recommended to safely install this product Missing hardware Please call 800 606 6387 for replacements We recommend the use of hand tools instead of power tools Customer Service 800 606 6252 Latest instructions available at www cb2 com phillips head screwdriver 8 screws 4 cams 4 bolts 8 wood dowels 4 flat washers 4 cam screws 4 spring...

Page 2: ... grooves of side panels as shown Fit dowels on side panels into corresponding holes of bottom panel as shown Attach bottom panel with 4 bolts 4 spring washers and 4 flat washers using a screwdriver Do not over tighten the bolts NOTE Do not over tighten the cam screws NOTE Make sure arrows on each cam points towards the nearest edge with holes left and right side panels top panel bottom panel left ...

Page 3: ...but do not over tighten screws with a screwdriver B Insert drawer bottom into grooves of drawer side and front as shown Attach right drawer side to drawer front and back with 4 screws as shown Attach drawer back to left side drawer with 2 screws as shown A B NOTE Do not over tighten the screws top panel left drawer side drawer front drawer bottom drawer back right drawer side Customer Service 800 ...

Page 4: ...gaged Assembly is now complete cleaning care Clean surfaces with a dry or damp soft cloth Do not use abrasive cleaners Do not use furniture wax or polish as the unit is finished with a protective clear lacquer It is recommended to use coasters to protect surface from heat and water NOTE Make sure glides are pulled out of the case and ball bearings are at the front of the extended glides Customer S...

Reviews: