Made in China - r08
Page 1 of 3
finn
LOUNGER
1
hardware
components
tools required
Thank you for purchasing the
Finn Lounger.
This page
lists all the contents included in the box. Please take
the time to identify the hardware as well as the
individual components to this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
Missing hardware?
Please call
800.606.6387
for replacements.
A. Insert 1
barrel screw
and 1
threaded bolt
into
left and right side frames
as shown. Secure, but
do not over tighten, the barrel screws with a
phillips head screwdriver.
B. Using a screwdriver, remove
set screws
from
each
barrel nut
and set aside. Insert
barrel nuts
into the
back frame
as shown. Align the hole on
the side of each
barrel nut
with the hole on the
end of the
back frame.
2 - side frames
(1 left, 1 right)
1 - back
frame
1 - front
crossbar
1 - center
rail
1 - slat roll
2 - barrel
nuts
allen wrench
left and right
side frames
Customer Service
800.606.6252
| Latest instructions available at
www.cb2.com
1 - matress
2 - threaded
bolts
8 - screws
2 - hex
nuts
4 - hex
bolts
2 - barrel
screws
2 - connectors
hex wrench
back
frame
A
B
2 - allen
bolts
phillips head screwdriver
(not included)
( We recommend the use of hand tools instead of power tools )
B
2 - caps
1 - support
leg
1 - support
leg bolt
5 - pads
