STEP 1
STEP 4
STEP 5
STEP 3
STEP 6
STEP 2
INSTALLATION MANUAL
GPR SERIES
ACCESSORIES
1
2
3
4
x14
x20
x20
M6x12
x22
PARTS LIST
1) Rotating rack base (1x)
2) Front & rear rack mounting rails (4x)
3) Base rack mounting rails (2x)
4) Front & rear connection panel (2x)
5) 19” 1U blind panel (2x)
6) Cable lacing bars (6x)
7) Front lock cover panel (1x)
M8
M6
Extract the slide-out platform from the base
by pressing the locking tab downwards and
pulling it.
Install the vertical front (4x) and rear (2x)
vertical rails to the base using M8 hex flange
nuts (10x).
Install both front & rear connection panels
using M8 hex flange nuts (4x).
Install the 19” 1U blind panels on the front
and rear side using 8 x M6 cage nuts and M6
x 12 pan head screws.
Install the cable lacing bars on the rear verti-
cal rails and base vertical rails using 12 x M6
cage nuts and M6 x 12 pan head screws.
Pull out the lock from the slide-out platform
to rotate the platform. It can be locked in 45°
and 90° position.
