Cavli Wireless P32 Series Evaluation Kit Hardware Manual
6
P32EVK has two output voltage ie., V3V3 and V3V7 pins has regulated 3.3 and 3.7
voltages respectively.
Notes:
1.
User should not power the board via USB port and pins simultaneously, it will
damage the device permanently.
2.
Make sure, the power supply is stable and can deliver enough current.
Reset
The P32EVK can be reset using pressing the RESET button on the board.
Boot
Boot button is used for programming purpose. User need to press the boot button and then
reset button to enter in the boot mode of the microcontroller.
Main Interface
UART interface
P32EVK serial port baud rate can be set to 115200.When users want to use the full function
serial port, you can refer to the following connection mode
