14–Windows Server 2016
Configuring QoS for RoCE
251
BC0154501-00 P
Figure 14-10. Advanced Properties: Setting VLAN ID
7.
To enable PFC for RoCE on a specific priority, issue the following command:
PS C:\Users\Administrators>
Enable-NetQoSFlowControl
-Priority 5
8.
To disable priority flow control on any other priority, issue the following
commands:
PS C:\Users\Administrator>
Disable-NetQosFlowControl 0,1,2,3,4,6,7
PS C:\Users\Administrator>
Get-NetQosFlowControl
Priority Enabled PolicySet IfIndex IfAlias
-------- ------- --------- ------- -------
0 False Global
1 False Global
2 False Global
NOTE
If configuring RoCE over Hyper-V, do not assign a vLAN ID to the
physical interface.
