CANplus
TM
CP800
Control Panel Operation Manual
21
9M02-1000-A201-EN
Revision E
Linear Throttling
Linear Throttling Allows an external device such as PLC to control the throttle using a 4-20 mA input
For a video showing Setup and Demonstration on a CP1000 (the CP800 functions the similarly), Click
or go to
Auto/Manual mode Toggle
Auto/Manual Mode Toggle allows switching between these two modes without an engine shutdown
For a video showing Setup and Demonstration on a CP900 (the CP800 functions the same), Click
or go to
Auto Ramp
The Auto ramp feature provides a configurable seven-stage RPM profile that will automatically ramp up and down the engine when the panel is in the
Autostart mode
Autostart
Configurable start and stop events for autostart switch inputs, 4-20 mA transducer (level, pressure, flow, etc.), 24x7 schedule run and countdown-to-off
timer
Autothrottle Maintain Point
Configurable 4-20 mA transducer and pulse flow meter target values to dynamically throttle the engine to maintain a level
