CANplus CP1000
Control Panel Operation Manual
*Patent Pending
20
9M02-1000-A401-EN Revision G
displayed, and the access level reverts to User.
Once elevated, the access level stays in effect until the panel is turned off or the display times out (see display
Power Timeout).
PIN Change
PINs can be changed via the Menu as follows: Configuration
→
System
→
PIN Settings
→
PIN change.
The PIN that is changed is the PIN for the current access level. For example, at the User level, only the User PIN
can be changed. To change the Tech PIN, use the Elevate Access Level menu and enter the correct Tech PIN.
Then go to the PIN Change menu to change the Tech PIN.
Menu PIN Required OFF
•
Accessing the menu is allowed with no PIN input required
•
Only User access level items are displayed
•
Use the Elevate Access Level menu to access the Tech or Admin menu items
Menu PIN Required ON
•
PIN is required to access the menu
•
User, Tech or Admin level access will be granted based on which PIN is entered. If the PIN does
not match the User, Tech or Admin PIN, then the panel will display “Invalid PIN”
Once an access level is granted, that level is retained until the key is turned off or the display times out (see
display Power Timeout).
When the key is turned back to the ON position, the access level reverts to User and follows the Menu PIN
Required setting.
3.8.3 Quick Access Menu
The Quick Access Menu can be opened by pressing the menu control button
. This menu contains
commonly accessed menu items. All access levels open this menu, and it is not affected by the Menu PIN
Required setting. The following is the Quick Access Menu tree:
•
Start-Stop with
•
Operation
•
Maintain Function
•
Language
•
Distance units
•
Pressure units
•
Volume units
•
Temperature units
•
High Set Point
•
Low Set Point
•
Target Point
•
Autostart Dashboard
