Cattani TURBO-SMART, Operator'S Handbook Manual

Page: 29 / 100

28
Instructions to navigate Turbo-Smart menus
and to modify some parameters
Main menus
When Turbo-Smart is switched on, the display shows the
Cattani logo for 10 seconds, after which time the main menu
appears.
Main Menu “A1”
This menu shows some parameters such as: cycles, suc-
tion activation time, temperature, presence/absence of the
amalgam container and system software release.
Control Menu “A2”
The display shows the number of times Turbo-Smart has been
switched on by means of the main switch (
Power Cycles ), the
total hours Turbo-Smart has had power supplied ( Uptime ), the
number of times suction has been activated ( Work Cycles ), the
total running hours of the aspirator ( Work Time ), the average
working hours of the blower ( Aspirator ) and the number of times
the control panel cooling fan has been activated ( Fan Cycles ).
Events Menu “A3”
The menu shows the last 10 events or alarms that have oc-
curred to Turbo-Smart.
Alarms are indicated with a number; refer to the table to
identify them.
Control Menu “A2”
COUNTERS – ODOM . A2
POWER CYCLES 000000
Number of times the aspirator has been switched on by means of the
main switch.
UPTIME [h] 000000 Total hours Turbo-Smart has had power supplied.
WORK CYCLES 000000 Number of times the aspirator has been activated by the dental unit.
WORK TIME [h] 000000 Number of real running hours (motors running).
ASPIRATOR [h] 000000 Average working hours of the aspiration motor (UNI-JET 75).
FAN CYCLES 000000 Number of times the control panel cooling fan has been activated.
HOME
INDEX