background image

ENG-30

Sports mode

Pace function

2 types of pace arrows, for speed and heart rate, are displayed in 

Sports mode. The arrow icons indicate whether the current speed/

heart rate is above or below the average speed/heart rate.

   

: The current value is above the average.

   

: The current value is below the average.

    

: The current value is equal to the average.

No arrows : The current value is “0”.

Lap function

Pressing the LAP button during measurement in Sports mode records the measurement 

data between a given set of points (average lap speed/maximum lap speed, average 

lap heart rate/maximum lap heart rate, lap time/split time) up to 99 points*. Immedi-
ately after recording, the lap data is displayed in the order as shown in the figure below, 

and then the display returns to the previous screen.

The maximum number of lap records may decrease depending on file utilization.  

For details, see “Wristwatch memory capacity limit” on page 40.

Average lap speed

Displays the average lap speed/heart rate from the previous 

point (for LAP 01: from the start of measurement) to the 

current point.

Average lap heart rate

Lap number

Displays the lap number just recorded.

* When  the  total  number  of  laps  exceeds  99  points,  “--” 

appears indicating further lap recording cannot be done.

Lap time

Displays the elapsed time from the previous point (for LAP 

01: from the start of measurement).

Split time

Displays the total elapsed time from the start of measurement.

Maximum lap speed

Displays the maximum lap speed/heart rate from the previ-

ous point (for LAP 01: from the start of measurement) to 

the current point.

Maximum lap heart rate

Any screen in 

Sports mode

Previous 

screen

Lap data

Current speed

Heart rate

LAP

2.5 sec.

2.5 sec.

Average lap speed

Maximum lap speed

Average lap heart rate

Maximum lap heart rate

Lap time

Split time

Lap number

Summary of Contents for Q3A




















































































Reviews: