Cateye Padrone Smart CC-PA500B Online Manual Download Page 113

Page: 113 / 145

Power sensor calibration

• Before starting calibration, read the power sensor instruction manuals and check the

precautions for the calibration procedure. If calibration fails, accurate power measurement

cannot be made.

• Always perform calibration without any power applied to parts to which the power sensor is

attached (cranks, etc.)

Caution

When the power sensor is used continuously, slight variation may occur in its unloaded state.

Correct this by calibrating it periodically.

When making a particularly important measurement, it is recommended that you calibrate the

sensor in advance.

Smart computer

(4 seconds)

Measurement

screen

Calibration screen

While measurement is stopped, on the measurement screen, press

MENU

for four seconds.

Calibration is completed in 3 seconds.

Summary of Contents for Padrone Smart CC-PA500B


















































































































































Search results

Summary of Contents for Padrone Smart CC-PA500B

Reviews:

Cateye Padrone Smart CC-PA500B, Online Manual, Page: 113 / 145

Search results

Summary of Contents for Padrone Smart CC-PA500B

Reviews: