background image

Cover, 

Introduction

Setup

Mounting on a 

bicycle

Starting 

measurement

Measurement  

results

Changing settings/

Using sensors

3

4

1

2

Frequently 

Asked 

Questions

Appendix

5

SET

6/13

Changing settings/

Using sensors

23

Changing settings of the Air GPS and sensors

How to pair sensors (including third party sensors) directly with the Air GPS unit

Pair third party sensors directly with the Air GPS unit.
* These sensors cannot be paired through Cateye Cycling™.

Caution!:

• 

Ensure that [Connect] on Cateye Cycling™ is off before starting pairing.

• 

Avoid pairing sensors at a race venue or in similar locations where there are a lot of 
other users. Doing so may cause the Air GPS to be paired with another sensor.

• 

Pairing with another sensor of the same type will overwrite the paired sensor 
information.

For changing the tire circumference value of third party sensors, see 

“How to change 

the tire circumference on the Air GPS unit” (page 26)

.

Turn on the Air GPS and press   (POWER) and MODE 
simultaneously to switch to the pairing screen.

Standby  

or  

Paused

Pairing screen

(Simultaneous pressing)

MODE

Pressing and holding MODE starts sensor search.

(Long press)

Searching for 

sensors

Pairing screen

MODE

* To stop sensor search, press and hold MODE again. 

The screen returns to the pairing screen.

Cancel pairing

MODE

(Long press)

Summary of Contents for Air GPS















































Reviews: