manualshive.com logo in svg

Catalyst AirCom UWB Analyzer, User Manual

Share
Download
Catalyst AirCom UWB Analyzer User Manual Download Page 69

Statistical Report

Catalyst Enterprises, Inc.

61

Using Pointers and Bookmarks

Pointers

The data viewer display incorporates three cursors labeled 

X, Y

 and

 T. 

The X,Y 

pointers are initially overlaid and positioned at location 0. The Trigger, or 

T

, pointer 

shows the trigger point in the captured sample and is the measurement reference.

Positioning the X Pointer

To position the X-Pointer within the viewer data display, click the left 
mouse button in the gray bar on the left side of the sample viewer next to 
the line where you wish to see the pointer. 

Positioning the Y Pointer

To position the Y-pointer within the viewer data display, click the right 
mouse button in the gray bar on the left side of the sample viewer next to 
the line where you wish to see the pointer.

Note:

You may also left click to set the X-pointer and right click to set the Y pointer in the 
frame and the column view by clicking in the narrow strip on the very left side of a 
cell. 

Time differences between the pointers are displayed in the pointer position toolbar. To display the
pointer position toolbar, click 

View

 on the main menu bar then 

Toolbar 

and choose 

Pointers

.

Locate Pointers

To quickly locate any of the pointers within the sample viewer display, 
click the 

Go To

 button and choose the pointer to locate. You may also 

locate the cursors by selecting Go To from the Edit menu and choosing 
the pointer to locate. 

Summary of Contents for AirCom UWB Analyzer















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands