Catalyst AirCom UWB Analyzer User Manual Download

Page: 61 / 110

Statistical Report

Catalyst Enterprises, Inc.

Statistical Report Toolbar

The Statistical report toolbar provides the following functions accessible by buttons
on the toolbar:

•

Export to Excel

•

Save as Text

•

Print Report

•

Print Preview

•

Report Display Settings

Export as Microsoft® Excel file

Choose a folder to save the Excel file in and an appropriate file name and click

Save.

Save as Text

Choose a folder to save the Text file in and an appropriate file name and click Save.

Print Statistical Report

Click the

Export to Excel

Button on the Statistical Report Toolbar to open the

Export to Excel dialog.

Click the

Save as Text

Button on the Statistical Report Toolbar to open the Export

to Text dialog.

Click the

Print

Button on the Statistical Report Toolbar to open the select printer

dialog. Choose an available printer and click

OK.

Summary of Contents for AirCom UWB Analyzer















































































































Search results

Summary of Contents for AirCom UWB Analyzer

Reviews:

Related manuals for AirCom UWB Analyzer

Brands by name

Popular brands

Catalyst AirCom UWB Analyzer, User Manual

Search results

Summary of Contents for AirCom UWB Analyzer

Reviews:

Related manuals for AirCom UWB Analyzer

Brands by name

Popular brands