Catalyst AirCom UWB Analyzer, User Manual

Page: 27 / 110

Protocol Analyzer Projects Catalyst Enterprises, Inc.
19
Defining Patterns
To select an item for capture, either highlight the category and click the Add>> button
or double-click the category to open a corresponding definition dialog.
Frame Double-click Frame to display the Frame specification dialog.
Figure 12. Frame Common Fields Setting
1. Enter values in the Common Fields area for Source ID , Destination ID ,
Sequence Control and Stream Index .
2. Click the down arrow next to the Secure drop-down combo box and choose
Any , Plain Text or Secure .
3. Click the down arrow next to the Burst Mode drop-down combo box and
choose Any , Normal or Burst .
4. Click the down arrow next to the Type drop-down combo box and choose a
Specific Field Type for capture.
Note: You may exclude the Specific Field by checking the Not check box