MODEL #:20441-000
Desk Lamp
1
. AC power outlet on base for small electronics, refer to
the label near the power outlet for recommended
maximum rating.
2
. Do not install non-factory wiring or any other electrical
components. Altering or modifying the lamp in any way will
3.
Avoid laying objects directly over the power supply cord
to avoid cutting or damaging the wire.
4
. Keep curtains, shades, wall hangings and all other
fabrics and objects away from the lamp shade, light switch
and the light bulb. Lamps are not designed to support
additional weight. Do not hang any objects from the lamp
or any lamp part.
5.
Place the lamp on a stable, level surface in an area
where the lamp will not be tipped over or bumped.
Read and Save:
render the product unsafe.
6.
This lamp is approved for indoor use only.
IMPORTANT SAFETY INSTRUCTIONS
BULB REPLACEMENT
(
not included)
1.
Turn off and unplug the lamp and allow bulb to cool
before replacing bulb.
2.
Light bulb should never touch the lamp shade.
Use one 60 Watt, Type A bulb or CFL equivalent
or LED equivalent bulb.
DO NOT EXCEED RECOMMENDED BULB WATTAGE.
CLEANING AND MAINTENANCE
1.
To clean: use a soft, dry cloth only.
2.
Do not use chemical or abrasive cleaning solutions.
1. Place the base (A) on a stable, flat surface.
2. Remove socket ring (B) from socket assembly (E).
3. Place the ribbed cage (D) and the glass shade (C)
over the socket, secure with the socket rings (B).
4. Install light bulb into socket assembly (E).
(Light Bulb not included).
5. Insert the plug into an electrical outlet.
6. Use toggle switch on the base (A) of lamp to turn
lamp on and off.
7. Loosen the joint knobs (F) and adjust the lamp to
the desired postion, then retighten joint knobs (F) to
secure.
CAUTION
: To avoid tipping the lamp over, adjust the
arm pole to the above diagrams for the full range
of positions available.
ASSEMBLY INSTRUCTIONS
F
A
C
D
E
B
