background image

6

Getting 

started...

GB IE

Before you start

Tools required

Before you start

To avoid the risks that are always present when you use 

an electrical appliance it is important that this appliance is 

installed correctly and that you read the safety instructions 

carefully to avoid misuse and hazards. Please keep this 

instruction booklet for future reference and pass it on to any 

future owners. After unpacking the appliance please check 

that it is not damaged. If in doubt, do not use the appliance 

but contact Customer Services on 0844 800 1128 (UK), 

1 800 535542 (Ireland) and 01 56 48 02 60 (France).
Check the package and make sure you have all of the parts 

listed.
Decide on the appropriate location for your product.

If this product contains glass please take care when fitting 

or handling to prevent personal injury or damage to the 

product.
The specifications plate is available on this appliance. This 

plate displays all the necessary identification information for 

ordering replacement parts.
If you sell the appliance, give it away, or leave it behind 

when you move house, make sure you also pass on this 

manual so that the new owner can become familiar with the 

appliance and its safety warnings.

SILICONE

Summary of Contents for GHDFF70AL

































Reviews: