Castelle FAXPRESS PREMIER, Administrator'S Manual

Page: 436 / 639

Admin Guide > Configuring the FaxPress Premier Xerox Interface
420
In the Connection Data section, enter the User Name and Password of an authenticat-
ed network user with full access rights to the repository workstation. The FaxPress Xerox
Interface will use this account to connect to the fax repository folder. Administrator ac-
counts are frequently used for this purpose.
The FaxPress Premier User Name will be used to send out the scanned fax jobs from
the Xerox system if the sender’s mailbox ID is not available. A default FaxPress Premier
user can be created for and associated specifically with the fax repository, such as Xerox1
in the example above. If the fax is sent using this repository default user, printed notifi-
cation of fax success and failure will be sent to the repository default user, too. If there
are several Xerox systems, each will have a unique fax repository (such as XeroxDrop2.
XeroxDrop3, etc.) and each can have a default user for the fax repository (Xerox2, Xerox3,
etc.). Each of these users must be mapped so they have the same FaxPress Premier User
Name and Xerox User name.
Note: To simplify printing of incoming faxes, you may want to route all faxes
to a specific Xerox system. Do this by assigning an incoming fax line to the
default repository user (Xerox1 in the example above). To make this line
setting, start FaxPress Plus (Start>Programs>FaxPress>FaxPress Plus)
then log in to the FaxPress Premier server and select the All Folders view.
Expand the Neighborhood, right-click on the Premier server and choose
Properties. Select the Line Settings tab, and in the Routing Type section,
click the Assign Line to User radio button and select the default repository
user (such as Xerox1) from the pull-down user menu.
Click Next to continue configuring the Xerox Interface.
The FaxPress Premier settings allow you to configure the Xerox Interface to send email
notifications using either the Email Using SMTP option (for SMTP-based mail systems) or