M e n u f u n c t i o n s
You can connect your radio with a data cable to a compatible PC, and use it
as a modem to enable connectivity from your PC to a data network (network
service). To establish a connection to the data network, you must activate the
access point you want to use for the connection. For details on the access
point, contact your network operator or service provider.
1. Select
.
2. To activate an access point, select
. Scroll to the
desired access point, and press
.
To change the access point settings, select
. To
change the alias you are using for the access point, select
. To change the Access Point Name (APN), select
Contact your network operator or service provider for the APN.
, and select one of the following:
•
—
to set the radio to ask for your phone code every
time the radio is switched on.
Your organisation can define if the phone code request is enabled or not.
If you enter an incorrect phone code five times in succession, the code is
blocked, and you must enter the security code to unblock the phone code.
•
—
to change what kind of access rights are
required for certain functions. You must enter the configuration code for
this function.
•
—
to change your access level (
), which
determines what kind of access rights you have. You must enter the
access level code for this function. If the
switching the radio off returns the level to
.
•
to change the phone code or the security code.
You should avoid using access codes similar to the emergency numbers,
such as 112, to prevent accidental dialling of the emergency number.
TMR880i_rel7.book Page 91 Mardi, 27. août 2013 11:00 11
