D i r e c t m o d e
Select channels and groups
Up to 60 direct mode channels can be stored in the memory of the radio. Up to
three groups can be stored for each channel. To select a channel, turn the
group selector until the desired channel is displayed. Wait until
is displayed and the radio plays a short tone. If voice feedback is
activated, the radio plays the index number of the channel when you turn the
group selector.
When you select a channel, the first group (A) is automatically selected. To
switch between the second and the third group (B and C) on the same
channel, press the back key. To select the first group (A) on the channel,
press and hold the back key. If voice feedback is activated, the radio plays the
index name (A, B, or C) of the group when you use the back key.
You can also select the channel and group with the scroll keys; press
or
in the idle mode to access the list of channels. To select a channel and its
first group (A), scroll to the desired channel, and press
. To select
another group from the channel, press
, and select the desired group.
Scan the groups on a channel
Direct mode scanning allows you to receive calls made to the other groups on
the same channel. Select
.
Q
Receive a direct mode call
You can receive direct mode calls both from group and individual addresses.
Group calls can be received from the selected group and the scanned groups
on the selected channel. Even if scanning is not on, you can receive group
calls from groups that are on the same frequency and that have been
predefined as open groups.
When you receive a direct mode call,
, the speaker’s number or name, and
the names of the channel and group are displayed. If the speaker’s number or
name is not available,
is displayed.
If the connection to the transmitting radio is lost,
is displayed.
TMR880i_rel7.book Page 51 Mardi, 27. août 2013 11:00 11