15
To establish a wireless LAN connection with Manual Connection 1 between
the second and subsequent computers and the Data Projector
1
On the computer, start up Wireless Connection 2.
z
If your computer is running Windows Vista, starting up Wireless Connection 2 will cause
the “User Account Control” message to appear. When it does, click “Allow”.
z
If the “Select Network” dialog box like the one shown below appears, click the wireless
LAN adapter you want to use for connection with the Data Projector and then click the
[OK] button.
z
If your computer is running Windows XP or 2000, do not select the “Connect to an
existing network” check box. See page 39 for more information about using this check
box.
2
Click [Cancel] to close the “Connect” dialog box that appears.
3
On the Wireless Connection 2 window, select [Connection] - [Switch Connection
Profile].
z
This will display the Switch Connection Profile dialog box.
4
Click the “Profile Name” down arrow button and then select “Manual Connection
1” from the list that appears.
5
Click the [Change Setup] button.
z
This will display the Manual Connection Setup dialog box.
Summary of Contents for YW-2L - Wireless LAN For Projector
Page 54: ...MA0805 C...
