28
Analog RGB Connection
With this type of connection, the RGB cable inputs only the image signal of the computer. If you also
want to output audio from the computer, you will need to connect an audio cable.
Note
An XJ-UT Series model has a
MONITOR OUT terminal that lets you directly output the
signal being input to the
COMPUTER IN 1 terminal or
COMPUTER IN 2 terminal to an
external display. For details, see “Using the MONITOR OUT Terminal (XJ-UT Series)” (page
74).
The relationship between the image output terminal and audio output terminal can be
changed as required. Note that the combinations shown in the table are initial default settings.
For details, see “Relationship Between Image Input and Audio Input” (page 41).
With this type of connection, connect to the HDMI, component video, or composite video terminal of
the video device.
HDMI Connection
With this type of connection, the video signal and audio signal from the video device are input
simultaneously using a single cable.
Projector Terminal
Connection Cable
Computer Terminal
COMPUTER IN 1
*
2
or
COMPUTER IN 2
Analog RGB Out (VGA)
terminal
AUDIO IN 1
*
3
or
AUDIO IN 2
Headphones jack or
other audio output jack.
*
2 An XJ-F Series model has a COMPUTER IN terminal only.
*
3 An XJ-F Series model has an AUDIO IN terminal only.
Connecting to a Video Device
XJ-UT Series
XJ-F Series
Projector Terminal
Connection Cable
Video Device Terminal
HDMI 2
or
HDMI 1
*
1
HDMI Out terminal
*
1 An XJ-UT312WN model has a
HDMI terminal only.
RGB cable (D-Sub 15-pin cable)
15-pin Mini D-Sub
Audio cable
Stereo mini jack
HDMI cable
HDMI Type A
