Using the Setup Menu
78
■
Image Adjustment
J
Restore Menu Defaults
This sub-menu returns all of the sub-menu items on the Image Adjustment main menu to
their initial default settings.
z
You can perform initialization even when there is no input signal. In this case, the
initialization is performed for the currently selected input source.
z
“Image Adjustment” main menu “Vertical Position”, “Horizontal Position”, “Frequency”, and
“Phase” settings are initialized for the current signal type (XGA/60Hz, UXGA/60Hz, etc.)
only.
z
For details about the initialization procedure, see “To initialize the settings of a particular
main menu item” on page 70.
Volume Adjustment
■
Volume Adjustment
J
Volume
This sub-menu can be used to adjust the volume level of the projector’s speaker. This setting
is also linked to volume settings made with the remote controller’s [VOL +] and [VOL –] keys.
z
Changing this setting when there is no input signal changes the volume setting of the
currently selected signal source.
z
A different setting is stored for each input source.
■
Volume Adjustment
J
Restore Menu Defaults
This sub-menu returns Volume to its initial default setting.
z
You can perform initialization even when there is no input signal. In this case, the
initialization is performed for the currently selected input source.
z
Initialization is performed separately for each input source.
z
For details about the initialization procedure, see “To initialize the settings of a particular
main menu item” on page 70.
