Casio PV-S460 User Manual Download Page 160

Page: 160 / 187

158

Chapter 15 Configuring the Unit

Turning Sound On and Off

1. Tap

Menu Bar

to display the menu bar, and then tap

System

–

Sound

2. Tap a check box to toggle the corresponding item’s sound on (checked)

and off (unchecked).

•

Scheduler alarms

turns all Scheduler Mode alarms on and off.

•

Alarm

turns the daily alarm on and off.

•

Key tone

turns the key input confirmation tone on and off.

•

See “Setting a Daily Alarm Time” for details about setting the alarm
time.

3. Tap

Set

to register your settings.

Setting a Daily Alarm Time

1. While the sound on/off setting screen is on the display in the above

procedure, tap on the time to the right of the

Alarm

item.

•

You can also display the alarm setting screen by tapping the alarm
indicator on the pop up tool screen (page 112) or the clock screen
(page 113).

2. Input the time you want to set, and then tap

NEXT

•

While the Daily Alarm is turned on, a tone sounds for about 20 seconds
at the preset time each day.

•

You can stop a sounding alarm by tapping anywhere on the screen.

Summary of Contents for PV-S460




























































































































































































Search results

Summary of Contents for PV-S460

Reviews:

Related manuals for PV-S460

Brands by name

Popular brands

Casio PV-S460, User Manual

Search results

Summary of Contents for PV-S460

Reviews:

Related manuals for PV-S460

Brands by name

Popular brands